Change Preferred Network Type with Tasker

Tasker made multiple declarations that would permit the user to execute some task on Android without root advantage. So in this article, I present an exhaustive investigation of how Tasker can accomplish a task without root advantage. Also, to exhibit that, I will show how you can change the preferred network type with Tasker without root authorization. Having said the entirety of that, we should now experience the article and get familiar with the means in detail.

Change Preferred Network Type with Tasker

To begin with, we have clarified the new authorizations and afterward have moved to the means. You can follow this guide and figure out how to utilize Tasker all the more successfully.

Automate Network Change on Android

So how are we ready to make and execute center-level undertakings without root? This is made conceivable using the Android Debugging Bridge or all the more prevalently known as ADB. With two or three ADB Commands, we would have the option to directly change the Network type from the Tasker without administrator rights. In such a manner, the central command will be WRITE_SECURE_SETTINGS. This gives the necessary permission for any application to read or write secure system settings. 

This permission isn’t made accessible to any third-party application, including Tasker. So we will execute an ADB command to the Tasker’s bundle name to give it read/write permission. At that point, we will utilize the ADB Wi-Fi permission. This permission will make an open network port on your device for the outsider application to get to it. Yet, this port is currently available to all outsider applications and isn’t merely restricted to Tasker. This may end up being unsafe. 

So remember that at whatever point this ADB Wi-Fi permission is executed, you will get a Permit USB debugging prompt on your devices. 

The Essentials for this Task

Above all else, download and install the Android SDK Platform Tools on your PC. This will give us the necessary ADB binaries

Following up, empower USB Debugging on your device. This will be required to ensure that your device can perceive the ADB commands executed from the PC. To empower it, head over to Settings > about phone > Tap on Build Number multiple times > Return to Settings > Sustem>Advanced > Developer Option > Enable USB Debugging. 

That is it. You may now continue with the means to change your preferred network type with Tasker. 

Instructions to Change the preferred network type with Tasker

The underneath directions will be separated into two different methods. In the first, we will be granting the write and WiFI Settings permission to Tasker. Simultaneously, and

In the second method, we discuss making the network switch task through the application and utilizing them. 

Step 1: Give Necessary Permission to Tasker 

  1. Download and install the Tasker application on your Device. 
  2. At that point, connect your device to the PC using a USB cable. 
  3. Head over to the SDK folder, type in CMD in the Address bar, and hit Enter. This will open the CMD. 
  4. Execute the ADB device command, and on the off chance that you get an alphanumeric code, it implies the gadget has been effectively associated with the ADB mode.
  5. Presently type the below command to give write Secure Settings permission to Tasker. 

adb shell pm award net.dinglisch.android.taskerm android.permission.WRITE_SECURE_SETTINGS 

  1. Following up, award the ADB Wi-Fi permission using the bellow command: 

ADB tcpip 5555 

  1. You may get an Authorize ADB command on your device; tap on allow. On the off chance that this is your device, you may likewise choose the consistently allow from this PC. 
  2. Whenever that is done, you may now disconnect your device from the PC. 

Method 2: Change the Network Type through Tasker 

  1. Open the Tasker application on your device and through the Disclaimer and quick Overview Page. 
  2. Head over to the task section and tap on the Yellow + button located at the base right. 
  3. Give this task a name and hit the tick to confirm it. For this pattern, we have called it as 4G. 
  4. Next up, tap on the in plus to symbol and select Net from the Action category. After tapping on to the Net Action menu, nextly click on Mobile Network Type. 
  5. At that point, go to the drop-down menu and select 4G.
  6. Similarly, you could likewise make a 2G/3G task. Make another task, name it 2G/3G, and select the mobile network Type from the Net Action menu. At that point, from the type menu, appoint it 2G And 3G
  7. So you have now made two distinct tasks: one to change to 4G and the other to change to 2G/3G. 
  8. Presently, from the primary task menu, tap on the overflow icon arranged at the upper right—select Preferences
  9. Go to the Action section. At that point, under the quick Settings tasks, the main will be assigned to toggle. The other two will anyway be clear. 
  10. So tap on them and allocate the 2G/3G and 4G tasks to both the unassigned settings fields individually. 
  11. Presently drag the Notification panel from the top and tap on the pencil symbol to alter the quick Settings panel. 
  12. You will currently see two unset Tasker switches, drag them, and move them to the quick Settings region. You will see them renamed to the first task names (2G/3G and 4G). 
  13. Naturally, you may see both of these alternatives featured. Yet, that doesn’t imply that they have been enabled. It would help if you tapped on the said switch to enabler them.
  14. So that is about it. You just should permit two ADB authorizations and it is feasible for you to execute numerous activities with Tasker that necessary root prior.

Leave a Reply